Suitable Paint:PU,NC, AC water-base paint etc.
characteristic
- With chain rod type rod conveyor, no need cleaning system
- Reciprocators adopt JAPAN PANASONICA control system. The max. speed can reach 100m/min. There are 2 reciprocating arms of each machine.
- Every reciprocating arm can equip 4 spraying guns and 1 relevant material-supply pump.
- The grating scanner at the entrance can measure the width of work piece to make the stroke of guns and turn on/off time more exact. And at the same time the waste is reduced.
- The spraying parameter is set by the operator on the Touch screen or Industrial PC
- Using PLC control system makes it a simple and intuitive instrument to see.
- The alarm lamp on the cabinet, when the device is overrun or fault, it will give alarm.
- Double filtering of the inlet air and closed spraying room make the air cleaner in the room.
- The filter replacement detection device to remind you when to change the filter cotton
- Water is used to filter the paint fog
- The blower with large horse power is installed to take the fog out of the spraying room
Technical Parameter
Model |
SPM1300V |
Max. spraying width |
1300mm |
Max. thickness of work piece |
80mm |
Overall dimension |
5600x4500x2400mm |
Max. Feeding speed |
8m/min |
Air pressure |
0.5-0.8 Mpa |
Total power |
12kw |