Good Wholesale Vendors Cnc Painting Machine - Auto spraying machine – Godn

Suitable Paint：PU,NC, AC water-base paint etc.
characteristic

-  With pin type rod conveyor, no need cleaning system               
- Reciprocators adopt JAPAN PANASONICA control system. The max. speed can reach 100m/min. There are 2 reciprocating arms of each machine.
- Every reciprocating arm can equip 4 spraying guns and 1 relevant material-supply pump.
- The grating scanner at the entrance can measure the width of work piece to make the stroke of guns and turn on/off time more exact. And at the same time the waste is reduced.
-  The spraying parameter is set by the operator on the Touch screen or Industrial PC
- Using PLC control system makes it a simple and intuitive instrument to see.
-  The alarm lamp on the cabinet, when the device is overrun or fault, it will give alarm.
-  Double filtering of the inlet air and closed spraying room make the air cleaner in the room.
-  The filter replacement detection device to remind you when to change the filter cotton
-  Water is used to filter the paint fog
- The blower with large horse power is installed to take the fog out of the spraying room   

Technical Parameter