100% Original Factory Wet Laminating Machine - Adhensive Glue Spraying Machine – Godn

Application: glue.

Features:

  • With pin type rod conveyor, no need cleaning system              
  • Reciprocators adopt Servo control system. The max. speed can reach 100m/min. There are 2 reciprocating arms of each machine.
  • Each reciprocating arm can equip 4 spraying guns and 1 relevant material-supply pump.
  • The grating scanner at the entrance can measure the width of work piece to make the stroke of guns and turn on/off time more exact. And at the same time the waste is reduced.
  • The spraying parameter is set by the operator on the Touch screen or Industrial PC
  • Using PLC control system makes it a simple and intuitive instrument to see.
  • The alarm lamp on the cabinet, when the device is overrun or fault, it will give alarm.
  • Double filtering of the inlet air and closed spraying room make the air cleaner in the room.
  • The filter replacement detection device to remind you when to change the filter cotton
  • Water is used to filter the glue fog
  • The blower with large horse power is installed to take the fog out of the spraying room   

Technical Parameter:

Model

SPM1300S

Max. spraying width

1300mm

Max. thickness of work piece

80mm

Overall dimension

5600x4500x2400mm

Max. Feeding speed

8m/min

Air pressure

0.5-0.8 Mpa

Total power

9kw


  • 100% Original Factory Wet Laminating Machine - Adhensive Glue Spraying Machine – Godn Related Video:

    WhatsApp Online Chat !